Reproduction of Originals
Fits 1955 Chevy 2 Door Hardtop & Convertibles
Replace your rusty, bent or pitted moldings
One set left & right side
Polished Stainless
Ships with black decal inserts-
Reproduction of Originals
1955 Chevy Lower Paint Divider
Fits 210 & Bel Air exc. Nomad/Wagon
Replace your rusty, bent or pitted moldings
One set left & right side
Polished Stainless
Beautiful Finish Ships with Stainless Wire Tail Clips -
Reproduction of Originals
Fits 1955-1957 Chevy Hardtop & 1955 Chevy Convertible/Nomad Vent Window Frame Cap
Replace your rusty, bent or pitted moldings
One set left & right side
Polished Stainless
-
1955~1956 Chevy Air Conditioner Levers (If using on a 1955 you need to use 1956 cables) CNC from Billet Aluminum (Set of 3) -
Reproduction of Originals
Fits 1955-1957 Chevrolet Two-Ten 2 & 4 Door Sedan along with the Two-Ten 2 & 4 Door Wagon Models
2 Door Models take 30 Push in clips and 4 end clips 4 Door Models take 30 Push in clips and 8 end clips (Depending on the year of your Tri-Five you may end up with extra clips- these numbers are based on 1955 models - 1956 & 1957 will take the same or less clips) 1955 Two-Ten 2 Door Wagon takes 51 Push in Clips and 6 end clips (This is the lower Belt line Clips only) 1955 Two-Ten 4 Door Wagon takes 53 Push in Clips and 10 end Clips (This is the lower Belt line Clips only) 1956 & 1957 Two-Ten Wagons may or may not use the same clips - If the holes in the body are the elongated oval holes these are the correct clipsSold as Sets
-
Reproduction
1955~1957 Bel Air 2-Door & 4-Door Sedan Upper & Lower Stainless Belt Line Molding Clip Set (Made from Stainless except push in clips) No more rusty clipsSold as Sets
-
Fits 1955 Chevrolet Hardtop & 1955~1957 Nomads
Get the last dome light you will every need
Crafted from billet aluminum
Complete assembly includes, housing, socket, wire harness, LED bulb & lens
Show quality
Note: For use with LED bulbs only (included with product)
-
New Reproduction Product1955~1956 Chevy Emergency Brake Warning Light & Bracket OnlyThe 1955-1956 has a bracket that mounts to the underside of dashThe 1957 has a bracket that mounts to the left screw of the brake handle bracketThe Bezel, Red Jewell, Housing and Mounting bracket are reproductions of the original 1955~1957 version, the back end has been updated- Provides a Flashing Red Light when the emergency brake is applied when the key is in the on position
- Helps prevent drive offs while the emergency brake is still applied
-
New Reproduction Product1955~1957 Chevy Emergency Brake Warning Light Bracket OnlyThe 1955-1956 has a bracket that mounts to the underside of dashThe 1957 has a bracket that mounts to the left screw of the brake handle bracket- This is only for the bracket, light shown in images is just for reference
-
New Reproduction Product1955~1957 Chevy Emergency Brake Warning Light KitThe 1955-1956 has a bracket that mounts to the underside of dashThe 1957 has a bracket that mounts to the left screw of the brake handle bracketThe Bezel, Red Jewell, Housing and Mounting brackets are reproductions of the original 1955~1956 version, the back end has been updatedComplete kit includes, Front Bezel, Red Jewell, Housing, Spring, Light, Light Socket, Mounting Bracket, Flasher, Flasher Harness, Flasher Bracket and the instructions.Simple wiring (See Instruction in one of the images)- Provides a Flashing Red Light when the emergency brake is applied when the key is in the on position
- Helps prevent drive offs while the emergency brake is still applied
-
Reproduction of Originals
Fits 1955-1957 Chevrolet Models
Fitment listed below 1955-1957 Glass Track Quarter Window Stop for 2 door Sedan or 2 Door HardtopReplace yours today if rusty, missing or pitted
Sold individually
-
Reproduction of Originals
Fits 1955-1957 Chevrolet Models
Fitment listed below 1955-1957 Glass Track Roller Guide, 6" length Fits rear door on 2 door sedan or 2 door wagon models 1955-1957 Glass Track Roller Guide, 13 1/8" length Fits Rear 4 door sedan or 4 door wagon 1955-1957 Glass Track Roller Guide, 13 9/16" length Fits front door on 4 door sedan or wagon 1955-1957 Glass Track Roller Guide, 14.75" length Fits front door on all 2 door modelsReplace your rusty, bent or pitted versions
Sold individually
-
New Tailgate Cable SetsFits 1955~1957 Chevrolet Nomads & Wagons
Ships with clevis pin sets Overall Length is 45 3/4 " for Nomads Overall Length is 37" for Wagons Replace your worn or frayed cables with this new quality set Set includes 2 cables and 2 sets of clevis pins -
Fits 1955~1957 Chevrolet Nomad & Wagons
Made from 304 Stainless These bolt to the rear body to guide the retractor cablesShow quality
-
Fits 1955~1957 Chevy Nomads Direct-Fit Gas Strut Kit Stainless Steel Struts Polished 304 Stainless Brackets One Set Left & Right Stainless Hardware Included Easy install, No Modifications Required -
Nomad Tailgate HingesFits 1955~1957 Chevrolet Nomads
Made from Billet Aluminum, Polished Ships with hardware one set left & rightShow quality
-
Inner quarter panel tailgate cable guideFits 1955~1957 Chevrolet Nomads & Wagons
Made from 304 Stainless Replace your missing or rusting cable guides Get your set before this hard to find item is gone -
Liftgate Alignment GuideFits 1955~1957 Chevrolet Nomads/Wagons
Ships with hardware -
Cable Balls & CoversFits 1955~1957 Chevrolet Nomads/Wagons
Made from 304 Stainless, Polished Ships with hardware one set left & rightShow quality
-
Reproduction of Originals
Polished StainlessReplace your missing or pitted moldings with this brand new item.
One set left & right side
Show quality
-
Tailgate Striker Anti-Skid PlatesFits 1955~1957 Chevrolet Nomads & Wagons
Set of 4 -
Fits 1955~1957 Chevy Sedan Deliveries Direct-Fit Gas Strut Kit Stainless Steel Struts Polished 304 Stainless Brackets One Set Left & Right Stainless Hardware Included Take a look at the image under the product gallery, Sedan Deliveries have a very tight tolerance on the liftgate. The struts possibly can rub some paint if you did not verify fitment before painting. Not all will have this problem or be in the same area, just depends on bodywork and fitment. You may need to put a slight relief in so no rubbing occurs -
Fits 1955~1957 Chevy Wagons Direct-Fit Gas Strut Kit Stainless Steel Struts Polished 304 Stainless Brackets One set Left& Right Stainless Hardware Included Easy install, No Modifications Required -
Wagon Tailgate HingesFits 1955~1957 Chevrolet Wagons
Made from Billet Aluminum, Polished Ships with hardware one set left & rightShow quality
-
Reproduction of Originals
Fits 1955~1957 Chevy 2 Door Hardtop & Nomads
Replace your rusty, bent or pitted moldings
One set left & right side
Polished Stainless
-
Reproduction of Originals
Sedan A-PillarsFits 1955~1957 Chevy Bel Air Sedans
Replace your rusty, bent or pitted moldings
One set left & right side
Polished Stainless
-
Fits all 1955~1957 Chevy's with bench seats. Get an additional 3.5" of legroom with this bolt in item.- Heavy duty aluminum construction
- Tooled
- Uses factory seat mounting locations
- Fits 2 door & 4 door front bench seats
- Threaded holes for ease of installation with no drilling
- Ships with grade 8 bolts
-
Sale!
Reproduction of Originals
Made from Stainless SteelReplace your rusty or pitted moldings with this brand new hard to find item.
One set left & right side
Great looking finish
Blems or Seconds is what is available at this time, a few small dimples from a secondary tooling process in the stainless. Those areas are not very noticeable when you put them on your car, this is about a 35% savings over the normal costs -
Reproduction of Originals
Stainless Steel
Replace your dented or pitted moldings with this brand new hard to find item.
One set left & right side
Show quality
-
Reproduction of Originals Replace your rusty or missing windlace guides with this brand new hard to find item. -
Door Striker Anti-Skid PlatesFits 1955~1960 Chevrolet Cars
One set left & right -
Door Striker ShimsFits 1955~1960 Chevrolet Cars
Made from 304 Stainless, Polished one set left & right -
Door StrikersFits 1955~1960 Chevrolet Cars
Made from 304 Stainless, Polished Ships with hardware one set left & rightShow quality
-
1956 Chevrolet Hood & Trunk Vee’s
Reproduction of originals but so much better
Each hood and trunk vee is crafted from a solid block of aluminium then highly polished and finally coated.
Replace your dull or pitted moldings with these brand new show quality pieces
Great looking finish available in Chrome or Matte Black
Get the quality products your Chevrolet deserves
-
Reproduction of Originals
Fits 1956 Chevy 2 Door Hardtops & Convertibles
Replace your rusty, bent or pitted moldings
One set left & right side
Ships with black insertsPolished Stainless
-
Reproduction of Originals
Stainless Steel
Replace your dented or pitted moldings with this brand new hard to find item.
One set left & right side
Show quality
-
Reproduction of Originals
1956-1957 Chevy Convertible/Nomad & 4 Door Hardtop Vent Window Cap
Replace your rusty, bent or pitted moldings
One set left & right side
Polished Stainless
-
4-Door Center Post Mouldings
Reproduction of originals
Replace your dull or pitted moldings with these brand new show quality pieces
Great looking chrome finish
Get the quality products your Chevrolet deserves
-
1957 Chevrolet Chrome Bumper Bullets
Original Style
Crafted from billet aluminum
highly polished and finally chrome plated.
Ships with stainless hardware
Great looking finish
Get the quality products your Chevrolet deserves
-
1957 Chevrolet Chrome Dash Bezels
Great fit
Show quality
-
New Reproduction1957 Chevrolet Dash Bezel Inserts
Great Fit
-
1957 Chevrolet Fender Louvers (Set of 6)
Reproduction of originals but so much better
We offer multiple versions either crafted by CNC (Billet Aluminum) or Molded
Highly polished and finally coated.
Studs on the back for easier installation
Drill template provide
Replace your dull or pitted moldings with these brand new show quality pieces
Great looking finish available in Gold, Chrome or Black
Get the quality products your Chevrolet deserves
-
1957 Chevrolet Fender Louvers (Set of 6)
Reproduction of originals but so much better
We offer multiple versions either crafted by CNC (Billet Aluminum) or Molded
Highly polished and finally coated.
Studs on the back for easier installation
Drill template provide
Replace your dull or pitted moldings with these brand new show quality pieces
Great looking finish available in Gold, Chrome or Black
Get the quality products your Chevrolet deserves
-
1957 Chevrolet Fender Louvers (Set of 6)
Reproduction of originals but so much better
We offer multiple versions either crafted by CNC (Billet Aluminum) or Molded
Highly polished and finally coated.
Studs on the back for easier installation
Drill template provide
Replace your dull or pitted moldings with these brand new show quality pieces
Great looking finish available in Gold, Chrome or Black
Get the quality products your Chevrolet deserves
-
1957 Chevrolet Hood & Trunk V’s
Reproduction of originals but so much better
Each hood and trunk V is crafted from a solid block of aluminium then highly polished and finally coated.
Gold V’s use a specialized vacuum plating process to obtain a beautiful long lasting finish.
Replace your dull or pitted moldings with these brand new show quality pieces
Great looking finish available in Gold, Chrome or Black
Get the quality products your Chevrolet deserves
-
1957 Chevrolet Hood & Trunk V’s
Reproduction of originals but so much better
Each hood and trunk V is crafted from a solid block of aluminium then highly polished and finally coated.
Gold V’s use a specialized vacuum plating process to obtain a beautiful long lasting finish.
Replace your dull or pitted moldings with these brand new show quality pieces
Great looking finish available in Gold, Chrome or Black
Get the quality products your Chevrolet deserves
-
1957 Chevrolet Hood & Trunk V’s
Reproduction of originals but so much better
Each hood and trunk V is crafted from a solid block of aluminium then highly polished and finally coated.
Gold V’s use a specialized vacuum plating process to obtain a beautiful long lasting finish.
Replace your dull or pitted moldings with these brand new show quality pieces
Great looking finish available in Gold, Chrome or Black
Get the quality products your Chevrolet deserves
-
1957 Chevrolet Nomad/Continental Kit Vee (Made from Billet Aluminum)
Reproduction of originals but so much better
Each Vee is crafted from a solid block of aluminum then highly polished and finally coated.
Great looking finish available in Gold or Chrome
-
Chrome Trunk VeeFits 1958 Chevrolet Impala
Made from Billet Aluminum, Highly polished and Chrome Plated Show quality -
Trunk BezelFits 1959 Chevrolet Impala
Made from Billet Aluminum, Highly polished and Chrome Plated Show quality - Best of the Best Order Bezel or Complete with Plastic Insert